How to Use Yuwell Blood Pressure Monitors.
-
- Step-by-Step Guide:
- Prepare the Device:
- Ensure the monitor has sufficient battery or is connected to power.
- Attach the cuff securely to the monitor.
- Position Yourself:
- Sit on a chair with your back supported and feet flat on the floor.
- Rest your arm on a table with the cuff at heart level.
- Wear the Cuff:
- Place the cuff on your bare upper arm, 2-3 cm above the elbow.
- Ensure the cuff is snug but not too tight.
- Start the Measurement:
- Press the power/start button on the monitor.
- Stay still and avoid talking while the cuff inflates and deflates.
- Read the Results:
- The monitor will display your systolic, diastolic, and pulse readings.
- Record the measurements if necessary.
- Turn Off and Store:
- Turn off the device and store it in a safe, dry place.
- Prepare the Device:
- Tips for Accurate Readings:
- Step-by-Step Guide:
-
-
- Empty bladder before measurement.
- Avoid caffeine, alcohol, or exercise 30 minutes prior.
- Wait at least 5 minutes in a calm state before taking measurements.
-
-
- Common Errors and Solutions:
-
-
- Crossed legs: Keep feet flat on the floor.
- Talking during measurement: Stay quiet.
- Improper cuff placement: Ensure the cuff is at heart level.Tips for accurate readings:
- Empty bladder before measurement.
- Correct sitting posture with back supported and feet flat.
- Proper cuff placement on the bare upper arm.
- Avoid talking or moving during measurement.
-